02 August 2009
Thanks to Franck Boutier (France) I was able to source the tiny script tubes for the rear scripts. These tubes are 3mm outside & 2mm inside so they were not easy to find but an online supplier in Texas had them and I bought a box of 50. They are shorter than the original clear tubes but they worked beautifully! Pushed firmly into the cleaned holes then the scripts pushed firmly into the tube holes. The front round VW emblem was a bit trickier since the clear spacer under the emblem kept it up too high, but when I clipped-off the tips of the script tubes (apparently keeping the emblem studs from going down far enough) it sat down close to the body and was firmly installed. There's no way these scripts will fall-out now! Thanks Franck!